Installing automatic rising bollards involves several key steps, which typically require electrical, mechanical, and sometimes hydraulic expertise. Below is a general guide to the installation process for automatic rising bollards:

1. Site Assessment & Preparation:

• Survey the Area: Ensure the ground is level, and the bollard location is clear of underground utilities like gas, water, and electrical lines.
• Mark the Area: Mark where the bollard(s) will be installed.
• Obtain Permits: Check with local authorities to ensure compliance with zoning and safety regulations.

2. Digging the Foundation:

• Excavation: Dig a hole that meets the manufacturer’s specifications (typically between 1.0 to 1.5 meters deep and about 0.5 to 1 meter wide, depending on the model). The hole should allow for both the bollard cylinder and its mechanism.
• Install Drainage: Depending on your location, drainage might be necessary to prevent water buildup around the bollard. Install gravel or a drain pipe to facilitate water flow.

3. Electrical & Control System Setup:

• Run Electrical Cables: Lay underground conduit and wiring from the control box or power source to the bollard location. Make sure the electrical connections follow the manufacturer's instructions for voltage and load requirements.
• Install Control Box: Position the control box in a safe, accessible location. This box will typically house the automation system, sensors, and manual override options.

4. Installing the Bollard:

• Place the Bollard in the Foundation: Carefully lower the bollard into the hole, ensuring it's level and properly aligned with the surface.
• Connect Power & Controls: Attach the bollard mechanism to the electrical wiring and control system, following the manufacturer’s wiring diagrams.
• Hydraulic Installation (if applicable): For hydraulic models, connect the hydraulic lines to the bollard.

5. Pour Concrete & Secure Bollard:

• Fill with Concrete: Once the bollard is correctly positioned, pour concrete around it, making sure not to cover any moving parts or electrical components.
• Allow to Set: Let the concrete cure according to the manufacturer’s instructions (typically 24-48 hours).

6. Testing & Calibration:

• Initial Power-Up: After the concrete has set, power on the bollard system and test its movement (raising and lowering). Verify that the bollard moves smoothly.
• Adjust Settings: Calibrate sensors and timers according to the needs of the site (e.g., automatic lowering after a certain period or integration with access control systems).
• Emergency Features: Ensure that emergency override systems (manual lowering or raising) are operational.

7. Final Checks:

• Inspection: Ensure that all electrical connections are properly sealed, and there are no loose or exposed wires.
• Security & Safety: Install any required warning lights, alarms, or signage to alert pedestrians and drivers when the bollards are raised or lowering.

8. Maintenance Plan:

• Create Maintenance Schedule: Plan for regular inspections and servicing, especially of hydraulic systems, sensors, and control mechanisms, to ensure long-term reliability.

Specification

What is Hostile Vehicle Mitigation Barriers?

Hostile Vehicle Mitigation (HVM) barrier is a physical security device designed to prevent or mitigate the impact of deliberate vehicle attacks, such as ramming attacks or unauthorized vehicle access to secured areas. These barriers are engineered to stop vehicles from breaching perimeters by either halting or slowing them down. HVM barriers are used to protect high-risk sites, public spaces, critical infrastructure, and events from vehicle-borne threats.

Why Choose Us?

ZASP is the professional manufacturer of HVM barriers and we are the ONLY Chinese supplier who passed the impact test in UK by MIRA.

We supply K4/K12 standard products, such as Shallow Mount Road Blocker, Fixed Bollards, Automatic Bollards, Removable Bollards, Rising Beam Gate, also we provide the semi-automatic bollards, manual bollards, tyre killers, modular vehicle barriers etc.

Beijing ZhuoAoShiPeng Technology Co., Ltd was established in 2009, which is professional manufacturer of Hostile Vehicle Mitigation roadway safety barrier equipment, the R&D and the operation office is situated in Fengtai District of Beijing. And the manufacturing base is located in Renqiu City, Hebei Province, the fabrication space now comprises of more than 120,000 square feet of production area.

ZASP provide high security level products of Hydraulic Automatic Bollards, Road Blockers and Tyre Killers, also supply Semi-Automatic / Fixed / Removable / Manually Retractable bollards for different security level selected.

ZASP products are widely used in many locations across the Globe, such as Embassies, Airports, School locations, Government locations, Stadiums, Rail Stations, Banks, Energy Plants locations, Commercial sites, Private Residences and more.

Service

Know-How & Quality
ZASP spans more than 17 years producing the highest quality Hostile Vehicle Mitigation equipment. As the professional manufacturer in R&D, produce, service and application innovation, we set standards of excellence for the industry in China.

Factory Direct
We are you “one-stop-factory”, cover HVM equipment enclosure production, assembly, integration, delivery, and keep everything under one roof to make it easier for our customers. OEM & ODM service are available.

Rapid Delivery
We have big production capacity to guarantee fast delivery and on-time shipment.

Customer Service
Comprehensive service working closely with our customers, fast response and direct service, experienced sales and engineers are always here to solve your queries or problems.

* Est. 17 Years
Established in 2009, product independent R&D, production and implementation, we set standards of excellence for the industry in China.

* China Innovation
+76 Patents of Utility Models, Design and Copyright of Computer Software.

* Implementation
+10000 project of roadway safety barrier implemented across the globe.

* Security Partners
ZASP with Branch office & Agents are all dedicated engineering, project management and service departments can support you from initial design stages trough to installation and aftercare.